Sherwin-Williams Fire Paint Firetex M71v2 Topcoat

  • Decorative Sheen Top Coat
  • Designed for Internal Environments
  • For Using Over Firetex Intumescent Primers
  • Available in 5 and 20 Litres

Colour: Ash Grey / Oyster Grey (BS 00-A-01)
Size: 5 Litres
Price:
Sale price£63.00ex vat

FIRETEX M71V2 is a Sheen decorative topcoat for the FIRETEX range of single pack intumescent coatings and also provides protection when used in internal semi-controlled conditions where condensation may occur (Category C2 as defined in ISO 12944-2)

Recommended Use

As a decorative topcoat for the FIRETEX range of single pack intumescent coatings but also to provide protection when used in an internal semi-controlled environment. (Category C2 as defined in ISO 12944-2).

After appropriate drying can be exposed to weather provided that the specific use or storage does not lead to ponding water due to rainfall, condensation or another site/transportation/storage circumstances.

Surface Preparation

Ensure surfaces to be coated are clean, dry and free from all surface contamination.

Application Equipment

The airless spray details given are intended as a guide only. Details such as fluid hose length and diameter, paint temperature and job shape and size all have an effect on the spray tip and operating pressure chosen. However, the operating pressure should be the lowest possible consistent with satisfactory atomisation. As conditions will vary from job to job, it is the applicators’ responsibility to ensure that the equipment in use has been set up to give the best results.
Airless Spray
Nozzle Size: .................................0.33mm (13 thou)
Fan Angle: ....................................40°
Operating Pressure: .....................155kg/cm² (2200 psi)
Conventional Spray
Nozzle Size: .................................1.27mm (50 thou)
Atomising Pressure: .....................3.5kg/cm² (50 psi)
Fluid Pressure: .............................1.0kg/cm² (14 psi)
The details of atomising pressure, fluid pressure and nozzle size are given as a guide. It may be found that slight variations of pressure will provide optimum atomisation in some circumstances according to the set up in use. Atomising air pressure depends on the air cap in use and the fluid pressure depends on the length of line and direction of feed i.e. horizontal or vertical.
Brush/Roller
The material is suitable for brush/Roller application and more than one coat may be necessary to give equivalent dry film thickness to a single spray-applied coat.

Full product data sheets and safety data sheets are available on request.

Download Product Data Sheet (PDS_FIRETEX_M71V2.pdf)

Payment & Security

Amazon American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed