- Metal Rust Converter
- For Use on Iron & Steel
- Low Sheen Finish
- Apply by Brush, Roller or Airless Spray
- Touch Dry in Four Hours
- Estimated Coverage Area 10m² Per Litre
Coo-Var Rust Converter will resist the rusting process and allow the surface to be overcoated. Coo-Var Rust Converter is for use on iron and steel where all rust cannot be fully removed.
Surfaces should be clean and free from surface dirt, dust and grease. Light to medium rusted steelwork must be properly prepared by wire brush or power tools (SSPC SP3) to remove loose millscale and flaky rust or paint, which is not sound or tightly adhered. Weathered steel should be high pressure water or wet abrasive blasted to SSPC-SP6. Best results are achieved if some bright metal (10%) is showing in the rusted area.
Apply when humidity is between 40 and 90% and the temperature is above 5°C. On warmer days it is recommended to damp down warm steel surfaces with a mist of water prior to application.
Coo-Var Zinc Phosphate Primer
When using Teamac Rust Converter, always decant into a separate container and never return surplus material to original bottle. The product is best applied by brush or deck scrubber to encourage penetration of rusted surfaces.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.