Sherwin-Williams Floorcoating Cemcrete TX

  • Polymer Modified Cementitious Coating
  • 17kg Containers
  • Elastomeric
  • Superb Adhesion
  • Use Internal & Externally
  • Suitable for Floors & Walls
  • Easy to Apply

Colour: Grey
Sale price£57.00ex vat

Cemcrete TX is a water-based, polymer-modified cementitious coating designed to be laid over a wide range of floor and wall surfaces to provide a smooth, durable finish strongly bonded to the substrate with a degree of flexibility to enable the accommodation of movement in the structure of the building. Cemcrete SM can be applied in exterior or interior situations.


  • Can be built up to a range of thicknesses
  • Elastomeric allowing for structural movement
  • Superb adhesion
  • Can be used internally and externally
  • Can be used as a floor and wall coating
  • Ease of application

Recommended Use

  • Exterior floor finishes such as driveways, walkways
  • Interior or exterior textured finish
  • Internal and external car parks
  • Public concourse areas
  • Ship decks
  • Can be used on a wide range of substrates

Surface Preparation

New Concrete Floors:

New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.

Existing Concrete Floors:

Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and making sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using Resuscreed PA. If the old resin flooring cannot be removed then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.

External Surfaces:

Where evidence of organic growth, lichen, moss etc. is apparent, surfaces must be thoroughly cleaned and should be treated with a long term fungicidal/biocidal treatment which should be allowed to react and then washed down. Careful attention should be given to areas in both horizontal and vertical surfaces such as cracks and joints where water penetration is possible.

NOTE: Care must be taken to ensure that surface preparation is thorough but does not disfigure the surface.


Pour the liquid component into the supplied mixing bucket.
Whilst mixing add the aggregate component slowly and mix for a further 2-3 minutes using a high-speed drill and paddle to ensure the mixture is lump-free and consistent. The mixed material should be applied immediately and consistently using the relevant application method.
Each coat should be evenly applied and allowed to dry before the next is applied. Where specific finishes are required it is recommended that trials are undertaken to ensure that the techniques are understood and able to be used on the surface available.

Application Conditions

Cemcrete TX should be applied where there are good drying conditions and the ambient temperatures of the area and substrate should not be allowed to fall below 5°C throughout the application and the curing period.

Cemcrete TX can be applied by a variety of techniques including trowel, pin rake, brush, squeegee etc. Each of these techniques will leave unique tool marks in the cured finish and these should be taken into consideration prior to application.

Full product data sheets and safety data sheets are available on request.

Download Safety Data Sheet (SDS_SW_Cemcrete_SM.pdf)

Payment & Security

Amazon American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed